DESIGN ASSIGNMENTS Flat Plate Design (Weighting: 15%) Repeat the example in Section 8.7 of the book Reinforced and Prestressed Concrete – Analysis and Design with emphasis on application of AS 3600-2009 by Loo and Chowdhury (2013) with the following specifications:  fc′ = 32 MPa  the end spans in the x and y directions = 8 m (instead of 10 m)  the interior spans = 10 m (instead of 12 m). Note that the modified Figure 8.7(1) incorporating the above changes is given as follows. y y 3.0m 3.0m 2.5m 8m 10m 10m 8m 4m 5m Slab I }HMS1* Column strip }HMS2* L'3 L"3 l2 l1 x z a a b b c c d d L C R Slab I (Member I) 3.0m 8m 2.5m 3.0m 10m 8m x (a) Plan (b) Side elevation z Figure 8.7(l) (c) Elevation2 Prestressed Concrete Design Problems Seven questions on prestressed concrete beam design and analysis from the book Loo, Y.C. and Chowdhury, S.H. (2013), Reinforced and Prestressed Concrete - Analysis and Design with Emphasis on Application of AS 3600-2009, Cambridge University Press, Melbourne, Second Edition as below: (1) Problem 3, Chapter 13 (2) Problem 4, Chapter 13 (3) Problem 5, Chapter 13 (4) Problem 3, Chapter 14 (5) Problem 4, Chapter 14 (6) Problem 2, Chapter 15 (7) Problem 3, Chapter 15 Weighting: 25% Due Date: Design Assignments, as above, are due in Week 8, Friday (5 pm) 16 September 2016.