Part A 1. Review the following scenario: You are a WHS consultant. You have been contracted by Australian Hardware to design and implement a WHS management system (WHSMS) for the organisation. You have decided to pilot your program in the Wollongong Store. You will need to develop WHS risk management policy and procedures, and plan and implement risk management in consultation with workers and their representatives. 2. Review the Australian Hardware simulated business information in the Appendices of the previous Assessment Task. Note: Detailed information on Australian Hardware, including operational policies and procedures, risk management, and financials may be accessed at: a. 'Australian Hardware', IBSA, . 3. Develop a policy and procedure/s for WHS risk management. Ensure your policy and procedure/s: a. define the organisation's approach to WHS risk management and commitment to legal compliance b. refer to relevant legislation, codes of practice, etc. c. include procedures for identifying hazards, and assessing and controlling risk d. include reference to, and procedures for using, hierarchy of control e. refer to and assist the organisation to comply with consultation requirements under the WHS Act. Note: Policies/procedures may be sourced and adapted, rather than written from scratch. 4. Develop recordkeeping policy and procedure/s: a. Include templates and procedures for collecting information on hazards, incidents and actions taken, such as incident reports and risk registers. Note: Policies, procedures, templates may be sourced and adapted, rather than written from scratch.