Assignment: Common Emitter Amplifier 1. Introduction In this Chapter, you may give a brief introduction of the common emitter amplifier, and, especially, the aim and objectives of the assignment. 2. Practical Measurement 2.1 Experimental Circuit 2.2 Experimental Equipment and Components 2.3 Experimental Procedure 2.4 Experimental Results 2.4.1 DC Conditions of Single Amplifier 2.4.2 Midband Gain of Single Amplifier 2.4.3 Frequency Response of Single Amplifier with Single Cc 2.4.4 Frequency Response of Single Amplifier with Double Cc 2.4.5 DC Conditions of Cascaded Amplifier (Note: If you have done the optional part) 2.4.6 Frequency Response of Cascaded Amplifier (Note: If you have done the optional part) 3. Theoretical Analysis 3.1 DC Conditions of Single Amplifier 3.2 Midband Gain of Single Amplifier 3.3 High Cut-off Frequency of Single Amplifier 3.3.1 Cut-off Frequency with Single Cc 3.3.2 Cut-off Frequency with Double Cc 3.3.3 Cut-off Frequencies with Cc=470pF/2 and Cc=0 3.4 DC Conditions of Cascaded Amplifier 3.5 Midband Gain AND Bandwidth of Cascaded Amplifier 4. PSPICE Simulation 4.1 DC Conditions of Single Amplifier 4.2 Midband Gain of Single Amplifier 4.3 Frequency Response of Single Amplifier With Single Cc 4.4 Frequency Response of Single Amplifier With Double Cc 4.5 Frequency Response of Single Amplifier With Cc=470pF/2 and Cc=0 4.6 DC Conditions of Cascaded Amplifier 4.7 Frequency Response of Cascaded Amplifier 5. Results Analysis 6. Conclusions References Appendixes