Prepared by: Dr Mahbub Ahmed Moderated by: A/Prof Nalin Sharda Apr 2017 Assessment Details and Submission Guidelines Unit Code MN503 Unit Title Overview of Internetworking Assessment Type Assignment 2 - Individual, written and demonstration – T1 2017 Assessment Title Network design with configuration Purpose of the assessment (with ULO Mapping) Main purpose of this assignment is to enable student to configure networking devices for a given business case study and understand limitations of a network design. After successful completion of this assignment, students should be able to: a. Investigate and resolve appropriate design and solutions for medium sized organisations. b. Analyse and report on the current and future state of the management of internetworking infrastructure and its applications. c. Discuss a roadmap process to use internetworking architecture to support longterm business goals. d. Implement a process to support the administration and management of internetworking. Weight 20% of the total assessments Total Marks 50 Word limit 700 Due Date Week 11, demonstrate during laboratory class and submit report on Moodle Submission Guidelines ● All work must be submitted on Moodle by the due date along with a completed Assignment Cover Page. ● The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2 cm margins on all four sides of your page with appropriate section headings. ● Reference sources must be cited in the text of the report, and listed appropriately at the end in a reference list using IEEE referencing style. Extension ● If an extension of time to submit work is required, a Special Consideration Application must be submitted directly to the School's Administration Officer, on academic reception level. You must submit this application within three working days of the assessment due date. Further information is available at: http://www.mit.edu.au/about-mit/institute-publications/policies-proceduresand-guidelines/specialconsiderationdeferment Academic Misconduct ● Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree. Students should make themselves familiar with the full policy and procedure available at: http://www.mit.edu.au/aboutmit/institute-publications/policies-procedures-and-guidelines/PlagiarismAcademic-Misconduct-Policy-Procedure. For further information, please refer to the Academic Integrity Section in your Unit Description.MN503 Overview of Internetworking Page 2 of 5 Prepared by: Dr Mahbub Ahmed Moderated by: A/Prof Nalin Sharda Apr 2017 Assessment Cover Sheet Student ID: Student Surname: Given Name: Course: School: Unit Code: Unit Title: Due Date: Date Submitted: Campus: Lecturer: Tutor: All work must be submitted on Moodle by the due date. If an extension of time to submit work is required, a Special Consideration Application must be submitted. Further information is available at: http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-andguidelines/specialconsiderationdeferment Academic Misconduct Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree. Students should make themselves familiar with the full policy and procedure available at: http://www.mit.edu.au/about-mit/institute-publications/policies-procedures-and-guidelines/PlagiarismAcademic-Misconduct-Policy-Procedure. For further information please refer to the Academic Integrity Section in your Unit Description. Student Declaration I/We declare that: □ the work contained in this assignment is my/our own work/group work, except where acknowledgement of sources is made; □ certify that this assessment has not been submitted previously for academic credit in this or any other course; □ I/we have read the MIT’s Plagiarism and Academic Misconduct Policy Procedure, and I/we understand the consequences of engaging in plagiarism; □ a copy of the original assignment is retained by me/us and that I/we may be required to submit the original assignment to the Lecturer and/or Unit Co-ordinator upon request; I/we have not plagiarised the work of others or participated in unauthorised collaboration when preparing this assignment. Student Signature: Date: Student Name:MN503 Overview of Internetworking Page 3 of 5 Prepared by: Dr Mahbub Ahmed Moderated by: A/Prof Nalin Sharda Apr 2017 Assignment 2 Specification Business case study: Assignment 2 is an extension of assignment 1 work. Description Report should include commands used to configure network devices. Discuss step by sep process to build the network for the chosen business case study. Write a report with the following contents ● Design a detailed Network in Netsim (You should not use packet tracer) which includes - Minimum of 4 switches (include series, model from your suggested first assignment report details) - Minimum of 3 routers (include series, model from your suggested first assignment report details) - 4 PCs ● Network device configurations a. Switch configuration: - set hostname as your name - set system clock to May 2017 10:00 am - display the name of the file and version of IOS - display the name of the interfaces - display 6 IOS modes b. Router configuration - set hostname as your family name - set system clock to Jun 2017 1:00pm - display the name of the file and version of IOS - display the name of the interfaces - display 6 IOS modes ● Network device configurations a. Switch configuration: - Set IP addresses on PC and switch - Create VLAN - Ping each other - Set VTP domain with your first name - Set VTP password with your family name - Demonstrate VTP packets b. Router configuration - set descriptions on interfaces, one with your name, second with your family name, third with your middle name - display information about directly connected devices to router - Setup IP addresses for each interfaces - What is the subnet mask did you use? - Ping all 3 routers. Demonstrate working of whole network.MN503 Overview of Internetworking Page 4 of 5 Prepared by: Dr Mahbub Ahmed Moderated by: A/Prof Nalin Sharda Apr 2017 Marking criteria Section to be included in the report Description of the section Marks Detailed Network Design in Netsim - Minimum of 4 switches - Minimum of 3 routers - 4 PCs 4 Network device configurations - Switch configuration - set hostname as your name - set system clock to Feb 2017 11am - display the name of the file and version of IOS - display the name of the interfaces - display 6 IOS modes 5 Network device configurations - Router configuration - set hostname as your family - set system clock to March 2017 3:30pm - display the name of the file and version of IOS - display the name of the interfaces - display 6 IOS modes 5 Switch configuration - Set IP addresses on PC and switch - Create VLAN - Ping each other - Set VTP domain with your first name - Set VTP password with your family name - Demonstrate VTP packets 6 Router configuration - set descriptions on interfaces, one with your name, second with your family name, third with your middle name - display information about directly connected devices to router - Setup IP addresses for each interfaces - What is the subnet mask did you use? - Ping all 3 routers. 5 Demonstration Demonstrate switch and router configuration in week 11 laboratory class 20 Troubleshooting steps Write on problems occurred and how did you troubleshoot. 5 Total 50MN503 Overview of Internetworking Page 5 of 5 Prepared by: Dr Mahbub Ahmed Moderated by: A/Prof Nalin Sharda Apr 2017 Marking Rubrics Description Excellent Very Good Good Satisfactory Unsatisfactory Detailed Network Design in Netsim Demonstrated excellent ability to think critically and sourced reference material appropriately Demonstrated excellent ability to think critically but did not source reference material appropriately Demonstrate d ability to think critically and sourced reference material appropriately Demonstrated ability to think critically and did not source reference material appropriately Did not demonstrate ability to think critically and did not source reference material appropriately Switch configuration Logic is clear and easy to follow with strong arguments Consistency logical and convincing Mostly consistent logical and convincing Adequate cohesion and conviction Argument is confused and disjointed Router configuration Logic is clear and easy to follow with strong arguments Consistency logical and convincing Mostly consistent logical and convincing Adequate cohesion and conviction Argument is confused and disjointed Troubleshooting steps All elements are present and very well integrated. Components present with good cohesive Components present and mostly well integrated Most components present Proposal lacks structure. Demonstration Logic is clear and easy to follow with strong arguments Consistency logical and convincing Mostly consistent logical and convincing Adequate cohesion and conviction Argument is confused and disjointed IEEE Reference style Clear styles with excellent source of references. Clear referencing style Generally good referencing style Sometimes clear referencing style Lacks consistency with many errors