1. Where can you access the latest software and drivers for a digital imaging device?2. You have been asked to capture an image for inclusion in a magazine. The image will be 8" x 10" (203 x 254 mm) and needs to be 300 dpi.1. Calculate the resolution of the original image.2. Will the calculated size allow for the image to be cropped?3. You are going to take a series of photographs. You think you are going to take approximately 200 images, each 8 megapixels, in the RAW format.1. Using the table provided here, calculate the minimum size storage media you will need.2. What are your options if you only have a 2 GB storage media? Appraise the options available and make a recommendation.4. Compare the effect of shutter speed, aperture, and film speed on correct exposure.5. Describe the following variables, their effect on image capture, and the steps that can be taken to minimise the likelihood of them occurring.1. Lens flare.2. Focus distance.3. Camera tilt4. Camera angle5. Barrel distortion6. You have been asked to capture an image that can be used to promote a brand of coffee beans. The project sponsor is seeking an image of a steaming mug of coffee with a bag of the sponsor's coffee beans slightly behind and to one side of the mug. The bag of beans should be slightly out of focus but the label and product name (in large letters on the label) should be distinguishable. Write an appraisal of the methods that can be used to arrange the lighting to capture an image that meets the sponsor's brief. 7. Describe the process of setting up a studio shoot so that an image is captured using the correct exposure.8. Use the table provided to calculate the correct light intensity. Upload your answer for assessment.