 Preparation of Papers for IEEE TRANSACTIONS and JOURNALS (February 2017) First A. Author, Fellow, IEEE, Second B. Author, and Third C. Author, Jr., Member, IEEE Abstract—The electronic wastes or the e-wastes are mainly the ones which are used as electornis and have been destined for the reuse, resale or the recycling. The development of the countries is based on handling the adverse human health with the major effects on the environmental development.there are recycling and the other disposal factors which are set to work with great care and the avoidance to any form of the unsafe exposure like the heavy metals that come from the landfills. The forms include the concentration with the re-usables that are from the reuse and the recycling of the operations with the loads that have been set with the surplus electronics. The consumption is based on using the operations of the system with the proper development of the commodity and the waste electronic definitons. Index Terms—E-waste, electronics, levels, Australia I. INTRODUCTION T HE focus is mainly on handling the rapid technology change with the change in the media and the falling prices, with the planned obsolescence. The solutions are based on working over the framework and the logistics that are for the proper collection of the services. There are different display of the units with the checkon how the e-waste is generated with the replacement with the constant needsfor the new and the higher tech products. There are forms where the electrical wastes are set to check on the valuability and the scarcity of the materials. The companies needto check the products with the spans where the customers need to check on the product and the forms with the agreement basedon increasing the discarding of the leecronic devices. The disagreement is set with the attempt to hold the regulations over the electronic concern over the environmental standards. There are critics for the trading in the use of the electronics to maintain the forms with the brokers setup or mainly through the development of the countries. The e-waste present the security for the threats to the individual and the other countries, where the hard drivers are not erased completely. Thefocus is on handling the recycling of the e-waste management with the setup that contains the valuable elements and the substances. The major challenge is about how the recycling of the printed products comes when there are circuits set to include the processing by the melting circuit boards. The conventional methods are set to determine the needs with the separation of the metals of value with lower form of the recycling efficiency. There are challenges related to teh processing of the waste where the conventional methods are mainly employed with the separation and the lower forms of the recyrlcing efficiency. There are alternative methods that include the proper disposal of the reusing materials that can pevent the health problems or the reduced forms of the green house gas emissions. II. RESEARCH OVER THE E-WASTE It has been seen that there are different units which are set to determine the forms of the electronic and the electrical devices which could not easily be used again. Here, there is a need to check on which product has the liability for the reuse, resale or the salvage. It mainly depends on hwo the work is able to maintain the certification with the responsibility of how the electronics tend to recycle nd reduce the environment and the human health impacts. As per the research, there have been different researches on how to work on increased use of the reusable formats with the conservation of the limited resources. There are Environment Protection Agency which is set to reuse and recycle the minimized exposure to the human health system. The assurance is based on the safety management with the materials to handle the detruction with the demonstration about the audits with the specifications of the higher environmental standards and the safety management that use the electronics. The certification is based on the different forms and the standards which include the continual forms of the oversight that is depending mainly on the certifying bodies. It is important to checkon the research of the Consumer Electrnics Assoiations where the urge is mainly to deal with the standards and the other forms of the consumer manufacturing operations. The processing is based on the different assessment where the formsareset with the collectionofthe dust and the other emissions which are caught by the scrubbers and the screens. The recycling of the raw materials is mainly set from end of life electronics which is important for working on the e-waste problems. There are standards which match to the different ideals along with the dismantling effect to provide with reusing the possibilities with intacting the natural resources. The additional forms of the recycling tend reduce and maintain the decrease of the amounts of any form of pollutants in the atmosphere. As per the article research by Rebecca, 2017, it has been seen that there are differnet forms of the computers which are found to be hazardous in the different parts of Australia. There are different types of the processing techniques which use the convey matierals for the shredding with the screening process. The process is also based on working over the materials with the monitoring effectsthrough the check on the health as well as the welfare of the child to work on the different projects. It has been that over 500 container loads, there are electornic wastes that comes from the different countriies which llead to the loading of the product. There are piles formation of the e-waste that tends to grow with the working ventures that are completely set in the non-profitable group. It is seen that there are different hazardous smokes and the gases that are captured, contained and then treated mainly to mitigate the environmental threats. The forms are set with the electronic waste with the recycling plant combining with improved recovery and the cost effectiveness. The pattern are based on the reuse which is the best option for the recycling as it is able to expand the life of the deivce. III. BENEFITS OF RECYCLING The patterns are set to check on the forms where there are effeitve solutions for the growng of the e-waste problems. There are electronic standards which works on the dismantled use of the strutures, where the possible range is set for the reduction in the amount of the greenhouse gases. There is a need to check on the materials where the 3D printing has been designed with the production of waste that could be recycled easily. The forms are set with the benefits when the recycling methods are used. This includes the bnefits of the recycling that are extended to handlethe responsible for aiming to minimize the dangers mainly to the human health. With this, there is a need to check on the management practices with the consideration of the local and abroad standards. The forms are set where the companies are also responsible for handling the manufacutirng with the electronic wastes substances. Some of the major points are: 1. Recycling with saving of the resources. There is a psosiblity to use the materials that are converted into the new products and there is a need to consumer the reosurces. 2. With this, there is a need to focus on the resources that tend to save the energy with the use of the recycled materials which make use of the neegy for producing the new products from the raw materials. 3. The recycling includes the refining and the processing of the raw materials which are mainly for creating the substances and then reduce the green house gas emissions. 4. The recycling helps in reudicng the incideneration with the reprocessing the new products. The results are set with the amount of rubbish that is sent for the incineration The electronic substances of the waste includes the assembling of the new products with the othersthat can be reduced to the metals.thesubstances are set to include the different materials. There is a proper setup of the reduce, reuse and the recycle for the people, where one needs to focus on handling the recycling than just reducing the amount of the trash. Hence, for this, the time and the effort is applied with reducing the size of the landfills. The recycling is set with the promotion of reducing the strain on the environment. The standards are set for the holding of the trash with the benefits that related to keep the pollution check. There is a need to take hold of the conservation of the natural resources where the forms are set to handle the resources that are for the recycling. It also includes the system with the recieivng of the large quanities of the recyclable materials. There is a employment opportunity with the recycling that is for the depositingof the trash for the recycling. The people are the workers who provide the stability to the process with the setup of the system where the government has different policies in place with the financial benefits for those who tend to recycle. The governmentmaily focus on the policies wher the financial benefits are set for those who want to recycle. This will help in saving the time and money. For the people, there are major benefits which are related to the recycling that is set for the economic development. The bits of the sampling is set with the growth of the scarce resources in the country. A strong economy is set with the efficiency in the nature where there is a need to check on the current waste disposal of the system. There is a need to work on the reduced forms of the greenhouse gases which is set with reduced air and water pollution. This will help in handling the recycling with the simulation of the use of the greener technologies. It also includes the bringing of the different group and the communities together with the recycling that is based on picking the trash from the roads and then collecting the waste materialsmainly to raise it for the schools and colleges. IV. 4 LEVELS OF THINKING There are events where according to the article of Rebecca, 2017, it has been seen that the levels are set for Westpac to handle the control with the processing of the electronic wastes. This is hazardous mainly as it lacks certain regulatory frameworks with the e-waste that ends up into the dumping only. Hence, forthis, there are warnings about the different recycling processes to avoid any costs or the legitimate disposal. Here, there are events which are collected to work on the recycling process with the export of the waste that comes from Australia to the other countries that is completely illegal. The patterns are set to enhance the system processing and working is based on the adverse effects of the e-waste. There are patterns whch works on handling the problems related to the skin diseases as well as the heart. The standards are set where there are refined forms for the Australian e-waste recycling to receive the emails from all the hungry buyers as well. The structure of the system is also depending upon the use of the growth where the e-wastes are set to discard their old computer and then build the waste. Hence, for this, it is also seen that there is a need to check on getting the smarter options with the better jobs of the people. The mental methods, thoughts and the morals are set with the values to take hold of the systematic procedures with the detrimental effects of the pollutants. This is mainly caused due to the burning of the e-waste materials. V. ORIGIN AND GROWTH OF PROBLEM There are issues related to the electronic industry base where the companies are trying to foster over the electronic gadgets. The advancement includes the forms where there is a cheaper form of the electronic gadeget that has been set with the advancement of the compeitition that comes from the company. The rate is also rising with the new devices that tend to launch depending upon the introduction of the product that has been set by the other company. REFERENCES [1] G. O. Young, “Synthetic structure of industrial plastics,” in Plastics, 2nd ed., vol. 3, J. Peters, Ed. New York, NY, USA: McGraw-Hill, 1964, pp. 15–64. [2] W.-