49006 Report Template First Author’s Surname sid, Second Author’s Surname sid, Third Author’s Surname sid …. Abstract— This document gives formatting instructions for students preparing Assessment Tasks for submission in UTS Subject 49006. The authors must follow the instructions given in the document. You should use this document as both an instruction set and as a template into which you can type your own text. Keywords— Include at least 5 keywords or phrases ⦁ Introduction This document is a template. An electronic copy can be downloaded from the UTS OnLine website. For questions on the Template guidelines, please contact the subject lecturer during class. ⦁ Page Layout An easy way to comply with the formatting requirements is to use this document as a template and simply type your text into it. ⦁ Page Layout Your assignment must use a page size corresponding to A4 that is 210mm wide and 297mm long. The margins must be set as follows: Top = 19 mm Bottom = 43 mm Left = Right = 14.32 mm Your assignment must be in two-column format with a space of 4.22 mm between columns. ⦁ Page Style The first paragraph in each Section shall not be indented. All subsequent paragraphs shall be indented. All paragraphs must be justified, i.e. both left justified and right justified. ⦁ Text Font of Entire Document The entire document should be in Times New Roman or Times font. Type 3 fonts must not be used. Other font types may be used if needed for special purposes. Recommended font sizes are shown in Table 1. ⦁ Title and Author Details Title must be in 24 pt Regular font. Author name must be in 11 pt Regular font. Author affiliation must be in 10 pt Italic. Email address must be in 9 pt Courier Regular font. All title and author details must be in single-column format and must be centered. Every word in a title must be capitalized except for short minor words such as “a”, “an”, “and”, “as”, “at”, “by”, “for”, “from”, “if”, “in”, “into”, “on”, “or”, “of”, “the”, “to”, “with”. Author details must not show any professional title (e.g. Managing Director), any academic title (e.g. Dr.) or any membership of any professional organization (e.g. IEAust). The family name only will be used (e.g. Smith). ⦁ Section Headings No more than 3 levels of headings should be used. All headings must be in 10pt font. Every word in a heading must be capitalized except for short minor words as listed in Section III-B. Font Size Appearance (in Time New Roman or Times) Regular Bold Italic 8 table caption (in Small Caps), figure caption, reference item reference item (partial) 9 author email address (in Courier), cell in a table abstract body abstract heading (also in Bold) 10 level-1 heading (in Small Caps), paragraph level-2 heading, level-3 heading, author affiliation 11 author name 24 title Table 1 Example of a table caption ⦁ Level-1 Heading: A level-1 heading must be in Small Caps, centred and numbered using uppercase Roman numerals. For example, see heading “III. Page Style” of this document. The two level-1 headings that must not be numbered are “Acknowledgment” and “References”. ⦁ Level-2 Heading: A level-2 heading must be in Italic, left justified and numbered using an uppercase alphabetic letter followed by a period. For example, see heading “C. Section Headings”. ⦁ Level-3 Heading: A level-3 heading must be indented, in Italic and numbered with an Arabic numeral followed by a right parenthesis. The level-3 heading must end with a colon. The body of the level-3 section immediately follows the level-3 heading in the same paragraph. For example, this paragraph begins with a level-3 heading. ⦁ Figures and Tables Figures and tables must be centred in the column. Large figures and tables may span across both columns. Any table or figure that takes up more than 1 column width must be positioned either at the top or at the bottom of the page. Graphics may be full colour. Graphics must not use stipple fill patterns because they may not be reproduced properly. Please use only SOLID FILL colours which contrast well both on screen and on a black-and-white hardcopy, as shown in Figure 1. Figure 2 shows an example of a low-resolution image that would not be acceptable, whereas Figure 3 shows an example of an image with adequate resolution. Check that the resolution is adequate to reveal the important detail in the figure. ⦁ Figure Captions Figures must be numbered using Arabic numerals. Figure captions must be in 8 pt Regular font. Captions of a single line (e.g. Figure 2) must be centred whereas multi-line captions must be justified (e.g. Figure 1). Figure 1 A sample line graph using colours which contrast well both on screen and on a black-and-white hardcopy Figure 2 Example of an unacceptable low-resolution image ⦁ Table Captions Tables must be numbered using uppercase Roman numerals. Table captions must be centred and in 8 pt Regular font with Small Caps. ⦁ References The heading of the References section must not be numbered as shown. All reference items must be in 8 pt font. Please use Regular and Italic styles to distinguish different fields as shown in the References section. Number the reference items consecutively in square brackets [1]. When referring to a reference item, please simply use the reference number, as in [2]. Do not use “Ref. [3]”. Examples of reference items of different categories shown in the References section include: example of a book in [1] example of a book in a series in [2] example of a journal article in [3] example of a conference paper in [4] example of a patent in [5] example of a website in [6] example of a web page in [7] example of a databook as a manual in [8] example of a datasheet in [9] example of a master’s thesis in [10] example of a technical report in [11] example of a standard in [12] Figure 3 Example of an image with acceptable resolution ⦁ Conclusions and Recommendation Your assignment should have a strong conclusions and recommendation. PDF copies of all your references must be submitted in a folder on the presentation day. The reference files shall to be labeled sequentially as per the example (eg 01_Metey_Laser Assisted Microtechnology.pdf). ⦁ References ⦁ S. M. Metev and V. P. Veiko, Laser Assisted Microtechnology, 2nd ed., R. M. Osgood, Jr., Ed. Berlin, Germany: Springer-Verlag, 1998. ⦁ J. Breckling, Ed., The Analysis of Directional Time Series: Applications to Wind Speed and Direction, ser. Lecture Notes in Statistics. Berlin, Germany: Springer, 1989, vol. 61. ⦁ S. Zhang, C. Zhu, J. K. O. Sin, and P. K. T. Mok, “A novel ultrathin elevated channel low-temperature poly-Si TFT,” IEEE Electron Device Lett., vol. 20, pp. 569–571, Nov. 1999. ⦁ M. Wegmuller, J. P. von der Weid, P. Oberson, and N. Gisin, “High resolution fiber distributed measurements with coherent OFDR,” in Proc. ECOC’00, 2000, paper 11.3.4, p. 109. ⦁ R. E. Sorace, V. S. Reinhardt, and S. A. Vaughn, “High-speed digital-to-RF converter,” U.S. Patent 5 668 842, Sept. 16, 1997. ⦁ The IEEE website. [Online]. Available: http://www.ieee.org/ ⦁ M. Shell. (2002) IEEEtran homepage on CTAN. [Online]. Available: http://www.ctan.org/tex-archive/macros/latex/contrib/supported/IEEEtran/ ⦁ FLEXChip Signal Processor (MC68175/D), Motorola, 1996. ⦁ “PDCA12-70 data sheet,” Opto Speed SA, Mezzovico, Switzerland. ⦁ A. Karnik, “Performance of TCP congestion control with rate feedback: TCP/ABR and rate adaptive TCP/IP,” M. Eng. thesis, Indian Institute of Science, Bangalore, India, Jan. 1999. ⦁ J. Padhye, V. Firoiu, and D. Towsley, “A stochastic model of TCP Reno congestion avoidance and control,” Univ. of Massachusetts, Amherst, MA, CMPSCI Tech. Rep. 99-02, 1999. ⦁ Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specification, IEEE Std. 802.11, 1997. ⦁