1. In preparing a site survey of the ACME site, list three questions you would ask about current internet connectivity? 2. Give one reason of why you would ask ACME about projected growth of their network, and one question you would ask related to projected growth. 3. Give one reason why you would ask about what new services (if any) are required for the network 4. List two questions you would ask regarding the wireless access requirements for ACME. 5. Give two examples of deficiencies in a current network that should be noted in a site survey. 6. List two things that would be included in the physical topology of the existing network 7. List four things that would be included in the logical topology of the existing network 8. What is the first step needed to prepare a structured cabling project? 9. When selecting a switch for purchase, list four factors that you would consider. 10. Give one example of a technology that implements expandability on a switch : "Planning a Network upgrade" http://catalogue.pearsoned.co.uk/samplechapter/1587132109.pdf Cisco Catalyst 2960-X FAQ http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2960-x-series-switches/qa_c67728348.html Getting Stated Guide http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960xr/hardware/quick/guide/b_gsg_2960xr.ht ml Hardware Installation Guide http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960xr/hardware/installation/guide/b_c2960xr_ hig/b_c2960xr_hig_chapter_010.html 11. What tools and equipment do you need to install the switch in the rack? 12. What is the maximum recommended temperature around the installed switch? 13. What it the process for powering on the switch after it is installed? 14. What should you do if the switch fails its POST process? 15. What is the first step you should do before installing an SFP in a switch port? 16. When running Express Setup, what type of cable do I use to connect my PC/laptop to the switch? 17. After you have set up the switch, what are the three options you can use to manage the switch and do further configuration? 18. What are the three ways you can access the switch in order to use the Command Line Interface (CLI)? 19. If you need to reset the switch, which button do you need to press on the switch? 20. If the PC/laptop you are using has a static IP address, what is the recommended troubleshooting procedure for Express Setup?